Standard: IEC60947-5
Rated Voltage: 380V/400; 660V/690V;
Rated Current: 9A～95A;
Poles: 3P;4P;
Rated controlling voltage Us:
AC ( 50Hz; 50Hz/60Hz;60Hz): 24;48;110;220;380; DC:24;48;110;220
Certificates: CCC;TUV;CE (UL coming soon)
Rohs Compliance: Yes

Application
    NDC1(Z)-09~95 series AC contactor(hereafter called contactor) is used in AC 50Hz (or 60Hz) with rated insulating voltage of up to 690V, rated working voltage of 400V and rated working current of 9A~95A in AC-3 type. It is used to connect (disconnect) the circuit and for frequent start AC motors from a distance. It can also be used as electro-magnetic starter when matched with thermal relay to protect the circuit against possible overload.

Working environment and installing condition
  Ambient temperature:Storage: -60 oC ~+80oC; Operating: -25 oC ~60 o
  Maximum altitude 3,000m; 5,000m for plateau type product;
  The relative humidity not more than 50% at the temperature of +40 oC, the lower the temperature, the higher humidity tolerated; such as 90% humidity permissible at 20 oC. Special measures should be taken to counteract the dew caused by temperature change.
  Pollution degree:3
  Installing type: "III" type
  In addition to screw install, it can be installed on 35mm, 75mm standard track
  Vertical install, the angle between installing surface and vertical surface should be less than +30o
Working hours
     a) eight hour
     b)around-the-clock working
     c) remittent periodical working load factor 40%
        operating frequency Ie≤25A: 1200 times/ hour
        Ie＞25A: 600 times/ hour

Remarks
  ODM products we produce for one top international corporations.
  Buy international standard product  with much lower the price, shorter delivery cycle, strong batch stability and flexible customized solution.